ADTRAN AOS Version R10.1.0 Command Reference Manual page 809

Command Reference Guide
Functional Notes
Use the realtime argument for this command to display full-screen output in real time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit
realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the
information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,
increase the terminal length (using the terminal length command; refer to
page 837).
Usage Examples
The following example displays voice quality statistics for all active calls:
>enable
#show voice quality-stats active
Start
ID Time From
--------------------------------------------------------------------------------------------------------------------------------------------
4236 3:02 pm 5152222
60000CRG0-35E
To Duration
5157744 6:55
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
terminal length <number> on
Lost Discard
Codec Pkts Pkts
G711 2 0
Delay
Avg Max
50 50
809