ADTRAN AOS Version R10.1.0 Command Reference Manual page 844

Command Reference Guide
Usage Examples
The following is sample output from the traceroute ipv6 command:
>enable
#traceroute ipv6 2001:DB8:1A0::3
Tracing route to over a maximum of 30 hops
Type CTRL+C to abort.
Legend: '!' = Success, '?' = Unknown host, '$' = Invalid host address
'*' = Request timed out, '-' = Destination host unreachable
'x' = TTL expired in transit, 'e' = Unknown error
'B' = Packet too big
1 2ms 2ms
2 102ms 109ms
60000CRG0-35E
3ms 2001:DB8:0:F820::5
102ms 2001:DB8:1A0::3
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
844