ADTRAN AOS Version R10.1.0 Command Reference Manual page 995

Command Reference Guide
ip dhcp pool <name>
Use the ip dhcp pool command to create a Dynamic Host Control Protocol version 4 (DHCPv4) server
address pool and enter the pool's configuration mode. The server pool is used to define the information to
be assigned to DHCPv4 clients by the DHCPv4 server. The pool chosen to serve a specific client's request
is determined by the current pool selection algorithm. Refer to the
3044 for more information.
Syntax Description
<name>
Default Values
By default, there are no configured DHCPv4 address pools.
Command History
Release 2.1
Release 18.3
Release R10.1.0
Functional Notes
Use the ip dhcp pool command to create multiple DHCPv4 server address pools for various segments of
the network. Multiple address pools can be created to service different segments of the network with
tailored configurations.
Usage Examples
The following example creates a DHCPv4 server address pool (labeled SALES) and enters the DHCPv4
server pool's configuration mode:
(config)#ip dhcp pool SALES
(config-dhcp)#
60000CRG0-35E
Specifies the name of the DHCPv4 server address pool using an
alphanumeric string (up to 32 characters in length).
Command was introduced.
Command syntax was changed to remove the hyphen and the server
keyword in ADTRAN internetworking products.
Command syntax was changed to remove the hyphen and the server
keyword in ADTRAN voice products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
DHCPv4 Pool Command Set on page
995