ADTRAN AOS Version R10.1.0 Command Reference Manual page 414

Command Reference Guide
run-tcl <filename> track <name>
Use the run-tcl track command to initiate a tool command language (Tcl) script based on the result of
monitoring the change of state of a track. Use the no form of this command to disable the track monitoring
for the given script. This command is only available on platforms with Network Monitoring enabled. For
more information on creating tracks, refer to
Command Set on page
run-tcl <filename> track <name> on-pass
run-tcl <filename> track <name> on-fail
Syntax Description
<filename>
<name>
on-pass
on-fail
Default Values
No default values are necessary for this command.
Command History
Release 16.1
Usage Examples
The following example activates a Tcl script to be run when the failure condition is met on track_a:
>enable
#run-tcl test1.tcl track track_a on-fail
60000CRG0-35E
track <name> on page 1372
2977. Variations of this command include:
Specifies a Tcl script file.
Specifies the name of the track to be monitored.
Specifies the file should be run when the track meets the passing condition.
Specifies the file should be run when the track meets the failure condition.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
and the Network Monitor Track
414