Table of Contents
Advertisement
Command Reference Guide
ip urlfilter <name> http
Use the ip urlfilter http command to create a uniform resource locator (URL) filter for Hypertext Transfer
Protocol (HTTP) (Transmission Control Protocol (TCP) port 80) traffic. Use the no form of this command
to delete the specified HTTP URL filter.
The URL filtering software runs on a server independent of the AOS product. For
additional information about the URL filtering technology, refer to the vendor's website.
Syntax Description
<name>
Default Values
By default, no URL filters are configured.
Command History
Release 12.1
Functional Notes
The firewall must be enabled using the ip firewall command in order to use URL filters. The URL filter
must be applied to the appropriate interface by using the ip urlfilter <name> [in | out] command. Refer to
this command in the appropriate interface for more information.
Usage Examples
The following example creates the HTTP URL filter called MyFilter that can be applied to an interface for
content filtering:
(config)#ip urlfilter MyFilter http
60000CRG0-35E
Specifies the URL filter name.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1174
Advertisement
Table of Contents
