ADTRAN AOS Version R10.1.0 Command Reference Manual page 672

Command Reference Guide
show media-gateway
Use the show media-gateway command to show cumulative totals for all Realtime Transport Protocol
(RTP) channels. Variations of this command include:
show media-gateway
show media-gateway channel
show media-gateway channel <slot/dsp.channel>
show media-gateway info
show media-gateway session
show media-gateway session <slot/dsp.channel>
show media-gateway summary
show media-gateway summary active
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<slot/dsp.channel>
channel
info
session
summary
active
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Release 17.1
60000CRG0-35E
Optional. Specifies the ID of the media-gateway channel to be displayed.
Optional. Shows cumulative totals for individual RTP channels.
Optional. Shows media-gateway information.
Optional. Shows current RTP sessions.
Optional. Shows summary of last active and current RTP sessions.
Optional. Shows summary of currently active RTP sessions.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
672