ADTRAN AOS Version R10.1.0 Command Reference Manual page 1130

Command Reference Guide
ip sip proxy allowed-servers <hostname | ip address>
Use the ip sip proxy allowed-servers command to specify a server to which devices behind the proxy are
allowed to send Session Initiation Protocol (SIP) traffic. Use the no form of this command to return to the
default setting.
Syntax Description
<hostname | ip address>
Default Values
By default, SIP traffic to any server is allowed in Transparent and Outbound proxy modes. This means that
if no server is specified, traffic to any server is permitted, but if this command is entered, only traffic to the
configured servers is allowed.
Command History
Release 16.1
Functional Notes
The ip sip proxy allowed-servers command can be entered multiple times to allow traffic to multiple
servers.
Usage Examples
The following example adds the server with an IP address of 10.200.1.9 as an allowed SIP proxy server:
(config)#ip sip proxy allowed-servers 10.200.1.9
60000CRG0-35E
Specifies the fully qualified domain name (FQDN) or IP address of the SIP
proxy server. IP addresses should be expressed in dotted decimal notation
(for example, 208.61.209.1).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1130