ADTRAN AOS Version R10.1.0 Command Reference Manual page 225

Command Reference Guide
debug auto-config
Use the debug auto-config command to activate debug messages associated automatic configuration
events. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Usage Examples
The following example activates debug messages associated with automatic configuration events:
>enable
#debug auto-config
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
225