ADTRAN AOS Version R10.1.0 Command Reference Manual page 323

Command Reference Guide
The following example activates the IPv6 firewall debug messages for the VRF instance gray and provides
sample output:
>enable
#debug ipv6 firewall vrf gray
2010.08.17 20:39:25 FIREWALL_V6.VRF gray id=firewall time="2010-08-17 20:39:25"
fw=NV3430 pri=6 proto=icmpv6 src=2001:DB8:1:1::2 dst=2001:DB8:1:1::1 msg="ICMPv6
type=128 code=0; Bytes processed over policy-session (bytes=256) from PRIVATEV6
policy-class on the interface eth 0/1.1"
2010.08.17 20:39:25 FIREWALL_V6.VRF gray Deleted policy-session due to clear all policy-sessions
command
Policy-session ID = 2; Count (total, policy-class) = 0, 0
Protocol = 58; Flags = 0x1; Timeout = 60
Initiating side: Policy-class = PRIVATEV6
From/To: eth 0/1.1 -> Loopback
Source: 2001.DB8:1:1::2
Destination: 2001:DB8:1:1::1
ICMPv6 Type/Code: 128/0; ID: 0
Responding side: Policy-class = self
From/To: Loopback -> eth 0/1.1
Source: 2001:DB8:1:1::2
Destination: 2001:DB8:1:1::2
ICMPv6 Type/Code: 129/0; ID: 0
60000CRG0-35E Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
323