ADTRAN AOS Version R10.1.0 Command Reference Manual page 675

Command Reference Guide
evc-map <name>
evc
evc <name>
policer
policer <name>
Default Values
No default values are necessary for this command.
Command History
Release A4.01
Usage Examples
The following is sample output from the show mef command:
#show mef
MEN Configured EVCs for efm-group 1 :
2213 3216
EVC DATA : Admin UP Protocol Connected UP
Connected to MEN Port efm-group 1
Connected to EVC Map DATA
Tag 3216
Preserve CE VLAN No
EVC DEFAULT : Admin UP Protocol Connected UP
Connected to MEN Port efm-group 1
Connected to EVC Map DEFAULT
Tag 2213
Preserve CE VLAN Yes
EVC Map DATA : Admin UP Protocol Connected UP
Connected to UNI mef-ethernet 1/1
Connected to EVC DATA
MEN Priority Inherit
MEN Queue Inherit
60000CRG0-35E
Optional. Displays the MEN priority and MEN queue information for
the specified EVC map.
Optional. Displays status, s-tag, CE VLAN preservation, and
connected EVC map information for all configured EVCs.
Optional. Displays status, s-tag, CE VLAN preservation, and
connected EVC map information for the specified EVC.
Optional. Displays configuration information for all EVC policer
policies.
Optional. Displays configuration information for the specified EVC
policer policy.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
675