Table of Contents
Advertisement
Command Reference Guide
Global Configuration Mode Command Set
ip sip privacy
Use the ip sip privacy command to specify outbound calls to include privacy headers (when configured)
and inbound calls to be filtered on privacy settings. Use the no form of this command to return to the
default setting.
Syntax Description
No subcommands.
Default Values
By default, IP Session Initiation Protocol (SIP) privacy is disabled.
Command History
Release 13.1
Command was introduced.
Usage Examples
The following example enables IP SIP privacy:
(config)#ip sip privacy
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1128
Advertisement
Table of Contents
