ADTRAN AOS Version R10.1.0 Command Reference Manual page 724

Command Reference Guide
Command History
Release 1.1
Release 9.1
Release 11.1
Release 13.1
Release 17.1
Release A1
Release A2
Release 17.4
Release 17.5
Release A4.01
Release 17.9
Release A4.05
Release 18.2
Release A5.01
Release R10.1.0
Usage Examples
The following is sample output from the show running-config command:
>enable
#show running-config
Building configuration...
!
no enable password
60000CRG0-35E
Command was introduced.
Command was expanded to include the high level data link
control (HDLC) and tunnel interfaces.
Demand, foreign exchange office (FXO), and serial interfaces
were added. The ip-crypto and router pim-sparse keywords
were added.
Command was expanded to include the ip rtp, ip sdp, probe and
track subcommands+.
Command was expanded to include the modifiers begin,
exclude, and include, and the ip urlfilter and
quality-monitoring keywords.
Command was introduced in the AOS voice products.
Command was expanded to include the mgcp parameter.
Command was expanded to include the ip nat pool parameter.
Command was expanded to include the security monitor
parameter.
Command was expanded to include the Ethernet in the first mile
(EFM) group interface and the ip sip proxy user-template
parameter. Command was expanded to include the Metro
Ethernet Forum (MEF) parameter and the MEF Ethernet
interface.
Command was changed to require the ip keyword for the
access-list and policy-class parameters for ADTRAN
internetworking products only.
Command was expanded to include the asymmetric digital
subscriber line (ADSL) interface.
Command was expanded to include the ip sip proxy failover
parameter.
Command was expanded to include the Gigabit Ethernet and
Gigabit Switchport interfaces.
Command was expanded to include the hmr parameters.
Command was also changed to require the ip keyword for the
access-list and policy-class parameters for ADTRAN voice
products.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
724