ADTRAN AOS Version R10.1.0 Command Reference Manual page 906

Command Reference Guide
bridge <number> protocol ieee
The bridge protocol ieee command configures a bridge group for the IEEE 802.1 Ethernet spanning-tree
protocol. Use the no form of this command (with the appropriate arguments) to delete this setting.
Syntax Description
<number>
Default Values
By default, all configured bridge interfaces implement IEEE spanning-tree protocol.
Command History
Release 1.1
Usage Examples
The following example deletes the bridge protocol setting for bridge group 17:
(config)#no bridge 17 protocol ieee
60000CRG0-35E
Specifies a bridge group number. Range is 1 to 255.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
906