ADTRAN AOS Version R10.1.0 Command Reference Manual page 694

Command Reference Guide
show port-auth
Use the show port-auth command to view port authentication information. Variations of this command
include:
show port-auth
show port-auth detailed
show port-auth detailed interface <interface>
show port-auth interface <interface>
show port-auth statistics
show port-auth statistics interface <interface>
show port-auth summary
show port-auth summary interface <interface>
show port-auth supplicant
show port-auth supplicant interface <interface>
show port-auth supplicant summary
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
detailed
statistics
summary
supplicant
interface <interface>
Default Values
No default values are necessary for this command.
60000CRG0-35E
Optional. Displays detailed port authentication information.
Optional. Displays port authentication statistics.
Optional. Displays a summary of port authentication settings.
Optional. Displays port authentication supplicant information.
Optional. Displays port authentication information for the specified interface.
Specify an interface in the format <interface type [slot/port |
slot/port.subinterface id | interface id | interface id.subinterface id | ap |
ap/radio | ap/radio.vap]>. For example, for a T1 interface, use t1 0/1; for an
Ethernet subinterface, use eth 0/1.1; for a PPP interface, use ppp 1; for an
ATM subinterface, use atm 1.1; and for a wireless virtual access point, use
dot11ap 1/1.1. Type show port-auth interface ? for a list of valid
interfaces.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
694