ADTRAN AOS Version R10.1.0 Command Reference Manual page 548

Command Reference Guide
ingress <interface>
ingress ipsec <rapidroute interface ID>
protocol <protocol>
source <ip address>
source-port <port>
type <type>
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Release 17.1
Release 17.6
60000CRG0-35E
Optional. Displays RapidRoute entries for an ingress interface.
Specify an interface in the format <interface type [slot/port |
slot/port.subinterface id | interface id | interface id.subinterface
id]>. For example, for a T1 interface, use t1 0/1; for an Ethernet
subinterface, use eth 0/1.1; for a PPP interface, use ppp 1; for
an ATM subinterface, use atm 1.1. Type show ip ffe ingress ?
for a complete list of valid interfaces.
Optional. Displays RapidRoute entries that go to an IPsec SA
on a specified RapidRoute interface. RapidRoute interface
identifiers range from 1 to 16777215.
Optional. Displays RapidRoute entries that use a specified
protocol. Protocols can be specified by selecting one of the
following:
ah
esp
gre
icmp
tcp
udp
0 to 255
Optional. Displays RapidRoute entries for a specified source IP
address. IP addresses should be expressed in decimal dotted
notation (for example, 10.10.10.1).
Optional. Displays RapidRoute entries for a specified TCP or
UDP source port. Ports range from 0 to 65535.
Optional. Displays RapidRoute entries of a specific type.
Specified types include one of the following:
ineligible
rejected
valid
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the ipsec and gre parameters.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
Displays Authentication Header (AH) Protocol
RapidRoute entries.
Displays Encapsulating Security Payload (ESP)
Protocol RapidRoute entries.
Displays Generic Route Encapsulation (GRE)
Protocol RapidRoute entries.
Displays ICMP RapidRoute entries.
Displays TCP RapidRoute entries.
Displays UDP RapidRoute entries.
Displays other protocol types.
Displays only ineligible RapidRoute entries.
Displays only rejected RapidRoute entries.
Displays only valid RapidRoute entries.
548