ADTRAN AOS Version R10.1.0 Command Reference Manual page 941

Command Reference Guide Global Configuration Mode Command Set
dot11ap access-point-control
Use the dot11ap access-point-control command to globally enable the access point controller logic on the
platform. Use the no form of this command to disable the access controller (AC) logic on the platform.
Syntax Description
No subcommands.
Default Values
By default, the AC logic is disabled.
Command History
Release 15.1 Command was introduced.
Usage Examples
The following example enables the AC logic:
(config)#dot11ap access-point-control
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 941