ADTRAN AOS Version R10.1.0 Command Reference Manual page 311

Command Reference Guide
debug ip rtp quality-monitoring
Use the debug ip rtp quality-monitoring command to display voice quality monitoring (VQM) event
debug messages (real time) to the terminal (or Telnet) screen. Use the no form of this command to disable
the debug messages. Variations of this command include the following:
debug ip rtp quality-monitoring
debug ip rtp quality-monitoring packets
debug ip rtp quality-monitoring packets rtcp
debug ip rtp quality-monitoring packets rtp
debug ip rtp quality-monitoring packets round-trip-delay
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
packets
packets rtcp
packets rtp
packets round-trip-delay
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 17.1
Release A1
Usage Examples
The following example activates RTP packets debug messages for VQM:
>enable
#debug ip rtp quality-monitoring packets rtp
2007.10.23 17:35:06 VQM.PACKET RTCP Sender SSRC=1244609021
2007.10.23 17:35:06 VQM.PACKET RTCP NTP timestamp (MSW)=3402167683 (0xcac8f583)
2007.10.23 17:35:06 VQM.PACKET RTCP NTP timestamp (LSW)=1116355952 (0x428a3d70)
2007.10.23 17:35:06 VQM.PACKET RTCP RTP timestamp=3990799999
2007.10.23 17:35:06 VQM.PACKET RTCP SSRC=1919245558
2007.10.23 17:35:06 VQM.PACKET RTCP Last SR timestamp=4119950126 (0xf591732e)
2007.10.23 17:35:06 VQM.PACKET RTCP Delay since last SR timestamp=175671
60000CRG0-35E
Optional. Displays VQM debug events of voice traffic packets.
Optional. Displays VQM debug messages for Realtime Transport Control
Protocol (RTCP) packet events.
Optional. Displays VQM debug messages for Realtime Transport Protocol
(RTP) packet events.
Optional. Displays VQM debug messages for round-trip delay mechanism
events.
Command was introduced.
Command was included in the AOS voice products.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
311