ADTRAN AOS Version R10.1.0 Command Reference Manual page 1168

Command Reference Guide Global Configuration Mode Command Set
ip sntp server
Use the ip sntp server command to enable the Simple Network Time Protocol (SNTP) server. This allows
the unit to accept SNTP requests. Use the no form of this command to disable the server.
Syntax Description
No subcommands.
Default Values
By default, the SNTP server is disabled.
Command History
Release 13.1 Command was introduced.
Usage Examples
The following example enables the SNTP server:
(config)#ip sntp server
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1168