ADTRAN AOS Version R10.1.0 Command Reference Manual page 630

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
show ipv6 interfaces
Use the show ipv6 interfaces command to display the status information for all Internet Protocol version 6
(IPv6) interfaces (or a specific IPv6 interface). This information includes IPv6 addressing, configured
parameters, and any IPv6 capabilities in use. Variations of this command include:
show ipv6 interfaces
show ipv6 interfaces brief
show ipv6 interfaces <interface>
show ipv6 interfaces <interface> prefix
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the
Enable Mode Command Set on page
Syntax Description
brief
<interface>
prefix
Default Values
No default values are necessary for this command.
Command History
Release 18.1
Release R10.1.0
Usage Examples
The following is sample output of the show ipv6 interfaces command, and displays information in brief
format for the ethernet 0/1 interface:
>enable
#show ipv6 interfaces brief ethernet 0/1
eth 0/1 [UP/UP]
FE80::2AO:C8FF:FE61:3082
2003::2AO:C8FF:FE61:3082
60000CRG0-35E
Optional. Displays an abbreviated version of interface statistics for all IPv6
interfaces.
Optional. Displays status information for a specific IPv6 interface. Specify
an IPv6 interface in the format <interface> <slot/port | interface id>. For
example, Point-to-Point Protocol (PPP) interface, enter ppp 1. If no
interface is specified, status information for all IPv6 interfaces is displayed.
Optional. Displays the list of prefixes for the specified IPv6 interface.
Command was introduced.
Command was expanded to include the tunnel interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
630

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents