ADTRAN AOS Version R10.1.0 Command Reference Manual page 719

Command Reference Guide
Set clauses:
local-preference 350
BGP Filtering matches: 87 routes
Policy routing matches: 0 packets 0 bytes
route-map RouteMap2, permit, sequence 10
Match clauses:
ip address (access-lists): Acl1
Set clauses:
metric 100
BGP Filtering matches: 10 routes
Policy routing matches: 0 packets 0 bytes
route-map RouteMap2, permit, sequence 20
Match clauses:
ip address (access-lists): Acl2
Set clauses:
metric 200
BGP Filtering matches: 12 routes
Policy routing matches: 0 packets 0 bytes
route-map RouteMap3, permit, sequence 10
Match clauses:
length 150 200
Set clauses:
ip next-hop: 10.10.11.254
BGP Filtering matches: 0 routes
Policy routing matches: 0 packets 0 bytes
route-map RouteMap3, permit, sequence 20
Match clauses:
ip address (access-lists): Acl3
Set clauses:
ip next-hop: 10.10.11.14
BGP Filtering matches: 0 routes
Policy routing matches: 144 packets 15190 bytes
In the example below, only RouteMap2 is displayed.
>enable
#show route-map RouteMap2
route-map RouteMap2, permit, sequence 10
Match clauses:
ip address (access-lists): Acl1
Set clauses:
metric 100
BGP Filtering matches: 10 routes
Policy routing matches: 0 packets 0 bytes
route-map RouteMap2, permit, sequence 20
--MORE--
60000CRG0-35E Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
719