ADTRAN AOS Version R10.1.0 Command Reference Manual page 967

Command Reference Guide
http secure-ciphersuite
Use the http secure-ciphersuite command to enable a secure sockets layer (SSL) cipher suite on
Hypertext Transfer Protocol (HTTP) and HTTP secure (HTTPS) connections. Use the no form of this
command to remove the SSL cipher suite configuration. Variations of this command include:
http secure-ciphersuite aes128-sha
http secure-ciphersuite aes256-sha
http secure-ciphersuite des-cbc-md5
http secure-ciphersuite des-cbc-sha
http secure-ciphersuite des-cbc3-md5
http secure-ciphersuite des-cbc3-sha
http secure-ciphersuite dhe-rsa-aes128-sha
http secure-ciphersuite dhe-rsa-aes256-sha
http secure-ciphersuite edh-rsa-des-cbc-sha
http secure-ciphersuite edh-rsa-des-cbc3-sha
http secure-ciphersuite rc4-md5
http secure-ciphersuite rc4-sha
Syntax Description
aes128-sha
aes256-sha
des-cbc-md5
des-cbc-sha
60000CRG0-35E
Enables a secure sockets layer version 3.0 (SSLv3) cipher suite with the
following properties:
Key exchange algorithm (Kx) = Rivest, Sharmir, and Adleman (RSA)
Authentication (Auth) = RSA
Bulk encryption algorithm (E) = 128-bit Advanced Encryption Standard
(AES)
Hash function (Hash) = secure hash algorithm 1 (SHA-1)
Enables an SSLv3 cipher suite with the following properties:
Kx = RSA
Auth = RSA
E = 256-bit AES
Hash = SHA-1
Enables a secure sockets layer version 2.0 (SSLv2) cipher suite with the
following properties:
Kx = RSA
Auth = RSA
E = 56-bit Data Encryption Standard (DES)
Hash = message-digest algorithm (MD5)
Enables an SSLv3 cipher suite with the following properties:
Kx = RSA
Auth = RSA
E = 56-bit DES
Hash = SHA-1
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
967