ADTRAN AOS Version R10.1.0 Command Reference Manual page 1099

Command Reference Guide Global Configuration Mode Command Set
ip rtp symmetric-filter
Use the ip rtp symmetric-filter command to enable filtering of received nonsymmetric Realtime
Transport Protocol (RTP) packets. Use the no form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, the RTP symmetric filter is disabled.
Command History
Release 14.1 Command was introduced.
Usage Examples
The following example enables ip rtp symmetric-filter:
(config)#ip rtp symmetric-filter
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1099