ADTRAN AOS Version R10.1.0 Command Reference Manual page 364

Command Reference Guide
debug sntp
Use the debug sntp command to enable debug messages associated with the Simple Network Time
Protocol (SNTP). All SNTP packet exchanges and time decisions are displayed with these debugging
events enabled. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages. Variations of this command include the following:
debug sntp client
debug sntp server
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
client
server
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 3.1
Release 13.1
Functional Notes
The debug sntp command activates debug messages to aid in troubleshooting SNTP issues.
Usage Examples
The following is sample output for the debug sntp client command:
>enable
#debug sntp client
#configure terminal
#sntp server ntp.adtran.com
2009.03.16 15:38:06 SNTP.CLIENT sent Version 1 SNTP time request to 172.22.48.13
2009.03.16 15:38:06 SNTP.CLIENT received SNTP reply packet from 172.22.48.13
2009.03.16 15:38:06 SNTP.CLIENT setting time to 03-16-2009 15:37:54 CDT
2009.03.16 15:37:54 SNTP.CLIENT waiting for 86400 seconds for the next poll interval
60000CRG0-35E
Displays SNTP client information.
Displays SNTP server information.
Command was introduced.
Command was expanded to include the client and server options.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
364