Table of Contents
Advertisement
Command Reference Guide
Global Configuration Mode Command Set
ip mgcp
Use the ip mgcp command to enable the Media Gateway Control Protocol (MGCP) stack. Use the no form
of this command to disable the MGCP stack.
Syntax Description
No subcommands.
Default Values
By default, the MGCP stack is disabled.
Command History
Release A2
Command was introduced.
Usage Examples
The following example enables the MGCP stack:
(config)#ip mgcp
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1043
Advertisement
Table of Contents
