ADTRAN AOS Version R10.1.0 Command Reference Manual page 955

Command Reference Guide
hmr policy <name>
Use the hmr policy command to create a Session Initiation Protocol (SIP) header manipulation rule
(HMR) policy and enter the policy's configuration mode. The HMR policy is a named collection of one or
more HMR rule sets, and the policy is used to apply the rule sets to specific SIP traffic, SIP proxy user
traffic, SIP proxy server traffic, or trunks. Use the no version of this command to remove the HMR policy.
Syntax Descriptions
<name>
Default Values
By default, no HMR policies exist.
Command History
Release R10.1.0
Functional Notes
SIP header manipulation is achieved by creating an HMR policy, a set of HMR rules, and applying those
rules to the HMR policy. The policy is then applied to a SIP trunk, to all SIP traffic on the AOS device, to
SIP traffic sent or received by a SIP proxy user, or to a SIP traffic sent or received by a SIP proxy server.
The HMR policies can be applied to either inbound or outbound SIP traffic. For more information about
configuring SIP HMR policies, refer to
Manipulating SIP Headers and Messages in AOS, available online at
(article number 3526).
Usage Examples
The following example creates the SIP HMR policy MYPOLICY1, and enters the policy's configuration
mode:
(config)#hmr policy MYPOLICY1
(config-policy-MYPOLICY1)#
60000CRG0-35E
Specifies the name of the HMR policy.
Command was introduced.
SIP HMR Command Set on page 3338
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
or the configuration guide
https://supportforums.adtran.com
955