Command Reference Guide
ip ffe timeout
Use the ip ffe timeout command to set the time to live (TTL) for RapidRoute Engine entries based on their
IP protocol. Use the no form of this command to return to the default value. Variations of this command
include:
ip ffe timeout ah <max timeout>
ip ffe timeout ah <max timeout> <inactive timeout>
ip ffe timeout esp <max timeout>
ip ffe timeout esp <max timeout> <inactive timeout>
ip ffe timeout gre <max timeout>
ip ffe timeout gre <max timeout> <inactive timeout>
ip ffe timeout icmp <max timeout>
ip ffe timeout icmp <max timeout> <inactive timeout>
ip ffe timeout other <max timeout>
ip ffe timeout other <max timeout> <inactive timeout>
ip ffe timeout tcp <max timeout>
ip ffe timeout tcp <max timeout> <inactive timeout>
ip ffe timeout udp <max timeout>
ip ffe timeout udp <max timeout> <inactive timeout>
Syntax Description
ah
esp
gre
icmp
other
tcp
udp
<max timeout>
<inactive timeout>
Default Values
By default, the maximum age timeouts are set to 1800 seconds and the inactive timeouts are set to
15 seconds.
60000CRG0-35E
Specifies timeout values in seconds for Authentication Header (AH)
Protocol.
Specifies timeout values in seconds for Encapsulating Security Payload
(ESP) Protocol.
Specified timeout values in seconds for Generic Route Encapsulation
(GRE) Protocol.
Specifies timeout values in seconds for Internet Control Message Protocol
(ICMP).
Specifies timeout values in seconds for all protocols not listed.
Specifies timeout values in seconds for Transmission Control Protocol
(TCP).
Specifies timeout values in seconds for User Datagram Protocol (UDP).
Specifies maximum age timeout in seconds. This is the maximum amount
of time an entry will be kept in the RapidRoute table regardless of activity.
Valid range is 60 to 86400 seconds.
Optional. Specifies idle timeout in seconds. This is the amount of time an
entry will remain in the RapidRoute table with no additional activity. Valid
range is 10 to 86400 seconds.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
997
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers