ADTRAN AOS Version R10.1.0 Command Reference Manual page 294

Command Reference Guide
debug ip packet
Use the debug ip packet command to display debug messages for every IP packet forwarded through the
unit. Adding the VRF name to this command displays debug information only for the named VPN routing
and forwarding (VRF). Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use
the no form of this command to disable the debug messages. Variations of this command include the
following:
debug ip packet
debug ip packet detail
debug ip packet dump
debug ip packet <acl name>
debug ip packet <acl name> detail
debug ip packet <acl name> dump
debug ip packet any-vrf
debug ip packet any-vrf <acl name>
debug ip packet any-vrf <acl name> detail
debug ip packet any-vrf <acl name> dump
debug ip packet any-vrf detail
debug ip packet any-vrf dump
debug ip packet vrf <name>
debug ip packet vrf <name> <acl name>
debug ip packet vrf <name> <acl name> detail
debug ip packet vrf <name> <acl name> dump
debug ip packet vrf <name> detail
debug ip packet vrf <name> dump
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
detail
dump
60000CRG0-35E
Optional. Displays IP packet detailed information.
Optional. Displays IP packet detailed information, as well as a hex dump of
the packets payload.
Note: The console stream can be captured to a log file and used as an input
file for display with ETHEREAL/Wireshark by using text2pcap.exe, which is
a part of the ETHEREAL/Wireshark distribution.
Execute as follows: text2pcap -l 101 <input_file> <output_file>
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
294