Command Reference Guide
aaa local authentication attempts max-fail <number>
Use the aaa local authentication attempts max-fail command to set the maximum number of failed
authentication attempts allowed before closing the terminal session when using AAA authentication. Use
the no form of this command to return to the default setting.
Syntax Description
<number>
Default Values
By default, the session closes after 3 failed attempts.
Command History
Release 14.1
Usage Examples
The following example configures the device to allow a maximum of 10 failed authentication attempts
before closing the session:
(config)#aaa local authentication attempts max-fail 10
60000CRG0-35E
Specifies the maximum number of failed authentication attempts allowed
before closing the terminal session. Valid range is 1 to 25 attempts.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
888