ADTRAN AOS Version R10.1.0 Command Reference Manual page 898

Command Reference Guide
banner
Use the banner command to specify messages to be displayed in certain situations. Use the no form of this
command to delete a previously configured banner. Variations of this command include:
banner exec <delimiter> <message> <delimiter>
banner login <delimiter> <message> <delimiter>
banner motd <delimiter> <message> <delimiter>
Syntax Description
exec
login
motd
<delimiter>
<message>
Default Values
By default, no banners are configured.
Command History
Release 2.1
Functional Notes
Banners appear in the following order (if configured):
• MOTD banner appears at initial connection.
• Login banner follows the MOTD banner.
• Exec banner appears after successful login.
Usage Examples
The following example configures the system to display a message of the day:
(config)#banner motd *The system will be shut down today from 7PM to 11PM*
60000CRG0-35E
Creates a message to be displayed when any executive-level process takes
place.
Creates a message to be displayed before the user name and password
login prompts.
Creates a message-of-the-day (MOTD) banner.
Specifies the banner text delimiter. Press Enter after the delimiter character
to begin input of banner text. After typing the banner message, enter the
same delimiter character to end the message.
Specifies the text message you wish to display.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
898