ADTRAN AOS Version R10.1.0 Command Reference Manual page 1055

Command Reference Guide
ip mgcp udp <port>
Use the ip mgcp udp command to specify the local listening port for the Media Gateway Control Protocol
(MGCP) stack for User Datagram Protocol (UDP) information. Use the no form of this command to return
to the default port.
Syntax Description
<port>
Default Values
By default, the MGCP gateway listens for UDP on port 2427 as defined by RFC 3435.
Command History
Release A2
Usage Examples
The following example specifies that the MGCP gateway will listen for UDP information on port 2727:
(config)#ip mgcp udp 2727
60000CRG0-35E
Specifies the port to listen for UDP information. Range is 1 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1055