ADTRAN AOS Version R10.1.0 Command Reference Manual page 216

Command Reference Guide
usbdrive0 <new file>
xmodem
Default Values
No default values are necessary for this command.
Command History
Release 18.2
Usage Examples
The following example creates a copy of the file myfile.biz (located in USB flash drive memory), names
the new file newfile.biz, and places the new file in flash memory:
>enable
#copy usbdrive0 myfile.biz flash newfile.biz
The following example copies the file myfile.biz (located in USB flash drive memory) to CompactFlash
memory (naming the new file newfile.biz):
>enable
#copy usbdrive0 myfile.biz cflash newfile.biz
The following example copies the file new_startup_config.txt (located in USB flash drive memory) to the
startup configuration:
>enable
#copy usbdrive0 new_startup_config.txt startup-config
60000CRG0-35E
Copies the specified file and saves it to USB flash drive memory.
Copies any file located in USB flash drive memory (using the XMODEM
protocol) to the PC connected to the console port. XMODEM capability is
provided in VT100 terminal emulation software, such as HyperTerminal.
After entering copy flash xmodem, AOS prompts for the following
information:
Source filename:
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
Specifies the name of the file to copy from USB
flash drive memory using XMODEM.
216