Show Tech - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show tech

Use the show tech command to save technical information to a file named showtech.txt. Variations of this
command include:
show tech
show tech terminal
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
terminal
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Release 17.1
Functional Notes
The show tech command runs a script that creates a showtech.txt file in flash memory that contains the
command output from the following show commands:
Not all listed show commands apply to all ADTRAN products.
show version
show modules
show flash
show cflash
show running-config verbose
show interfaces
show atm pvc
60000CRG0-35E
Optional. Displays the showtech.txt file output to the terminal screen in real
time.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
768