ADTRAN AOS Version R10.1.0 Command Reference Manual page 849

Command Reference Guide
voice loopback-call
Use the voice loopback-call command to initiate and terminate voice loopback calls. Variations of this
command include:
voice loopback-call start from <number> to <number>
voice loopback-call stop account <number>
voice loopback-call stop all
voice loopback-call stop id <number>
Syntax Description
start from <number>
to <number>
stop
account <number>
all
id <number>
Default Values
By default, no loopback accounts are configured.
Command History
Release A1
Usage Examples
The following example starts a voice loopback call:
>enable
#voice loopback-call start from 5555 to 6100
60000CRG0-35E
Starts a loopback call from the specified extension number (loopback
account).
Specifies the extension number to call.
Stops active loopback calls.
Terminates the call(s) for the specific account.
Terminates all loopback calls.
Terminates a specific loopback call based on the identity number of the call.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
849