Table of Contents
Advertisement
Command Reference Guide
show lldp neighbors statistics
Use the show lldp neighbors statistics command to display statistics about Link Layer Discovery
Protocol (LLDP) neighbor table actions.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the
Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 8.1
Release 17.1
Functional Notes
This command shows information about the changes in this device's neighbor table. The information
displayed indicates the last time a neighbor was added to or removed from the table, as well as the number
of times neighbors were inserted into or deleted from the table.
System Last Change Time
Inserts
Deletes
Drops
Age Outs
60000CRG0-35E
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Shows the time at which the most recent change occurred in the neighbor
table.
Shows the number of times neighbors have been added to the table.
Shows how many times neighbors have been deleted from the table
because an interface was shut down.
Shows how many times the insertion of a new neighbor into the table failed
because the table was full.
Shows how many times neighbors have been removed from the table
because no new updates were received from that neighbor before its time
to live (TTL) timer expired.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
655
Advertisement
Table of Contents
