Command Reference Guide
Global Configuration Mode Command Set
Functional Notes
Use this command to configure AOS to forward UDP packets across the wide area network (WAN) link to
allow remote devices to connect to a UDP service on the other side of the WAN link.
Usage Examples
The following example forwards all domain naming system (DNS) broadcast traffic to the DNS server with
IP address 192.33.5.99:
(config)#ip forward-protocol udp domain
(config)#interface eth 0/1
(config-eth 0/1)#ip helper-address 192.33.5.99
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1028
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers