ADTRAN AOS Version R10.1.0 Command Reference Manual page 1105

Command Reference Guide
ip security monitor stats-filter <name>
Use the ip security monitor stats-filter command to create a new security monitor filter and enter the
filter configuration mode. For more information on configuring the security monitor statistics filter refer to
threat on page 3337. Use the no version of this command to delete the specified filter.
Syntax Description
<name>
Default Values
By default, no security monitor filters exist.
Command History
Release 17.5
Usage Examples
The following example applies a filter named F1:
(config)#ip security monitor stats-filter F1
Creating new filter "F1".
(config-secmon-filter)#
60000CRG0-35E
Specifies the filter to be applied.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1105