ADTRAN AOS Version R10.1.0 Command Reference Manual page 407

Command Reference Guide
reload
Use the reload command to perform a manual reload of AOS. Variations of this command include:
reload
reload cancel
reload in <delay>
Performing an AOS reload disrupts data traffic.
Syntax Description
cancel
in <delay>
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Usage Examples
The following example reloads the AOS software in 3 hours and 27 minutes:
>enable
#reload in 03:27
The following example reloads the AOS software in 15 minutes:
>enable
#reload in 15
The following example terminates a pending reload command:
>enable
#reload cancel
60000CRG0-35E
Optional. Deactivates a pending reload command.
Optional. Specifies a delay period in minutes (mm) or hours and minutes
(hh:mm) that AOS will wait before reloading.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
407