ADTRAN AOS Version R10.1.0 Command Reference Manual page 1177

Command Reference Guide
ip urlfilter max-request <value>
Use the ip urlfilter max-request command to set the maximum number of outstanding uniform resource
locator (URL) lookup requests that can be sent to a URL filter server without a response. Use the no form
of this command to set the value back to its default setting.
Syntax Description
<value>
Default Values
By default, the number of outstanding requests is 500.
Command History
Release 12.1
Functional Notes
After the maximum number of URL lookup requests is reached, the no ip urlfilter allowmode setting will
be used to allow or block all following requests until enough URL lookup responses have been received
from the URL filter server.
Usage Examples
The following example sets the maximum number of URL lookup requests to 250:
(config)#ip urlfilter max-request 250
60000CRG0-35E
The maximum number of outstanding URL lookup requests. Valid range
is 1 to 500 requests.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1177