ADTRAN AOS Version R10.1.0 Command Reference Manual page 799

Command Reference Guide
show voice mail
Use the show voice mail command to display voice mail information for the system or a specific user.
Variations of this command include:
show voice mail
show voice mail <number>
show voice mail notify-schedule <number>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<number>
notify-schedule <number>
Default Values
No default values are necessary for this command.
Command History
Release 12.1
Release 17.1
Usage Examples
The following example shows sample output from the show voice mail command:
>enable
#show voice mail
AccountID VM COS
--------------------------------------------------------------------------------------------------------------------------------------------
1000
2000
2001 normal_voicemail
2002 normal_voicemail
2003 normal_voicemail
2004 normal_voicemail
60000CRG0-35E
Optional. Displays voice mail information for the specified user's extension.
Optional. Displays the voice mail notification schedule for the specified
user's extension.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
New Num Total Time Total Time
Msg Msg Used
- - 00:00:00
- - 00:00:00
38 38 00:09:54
40 40 00:09:49
39 39 00:09:54
35 35 00:09:55
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
Greeting
Free Time
00:00:00 00:00
00:00:00 00:00
00:00:06 00:02
00:00:11 00:02
00:00:06 00:02
00:00:05 00:01
799