ADTRAN AOS Version R10.1.0 Command Reference Manual page 1017

Command Reference Guide
ip firewall rst-timeout <value>
Use the ip firewall rst-timeout command to specify the time period allowed for Transmission Control
Protocol (TCP) reset. Use the no form of this command to return to the default setting.
The AOS firewall must be enabled (using the command
stateful inspection firewall to be activated.
Syntax Description
<value>
Default Values
By default, ip firewall rst-timeout is set to 20 seconds.
Command History
Release 10.1
Usage Examples
The following example sets the TCP reset time period to 120 seconds:
(config)#ip firewall rst-timeout 120
60000CRG0-35E
Specifies the time period in seconds allowed for TCP reset. Range is 0 to
4294967295 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ip firewall on page 999) for the
1017