ADTRAN AOS Version R10.1.0 Command Reference Manual page 471

Command Reference Guide
Enabled & Up-To-Date
Client Antispyware: None Installed
Client Automatic Security Updates: Enabled, Download, but Don't Install
Client Security Updates: From 10.10.10.3
Client Requires Remediation: False
Network Connectivity: Not restricted
The preceding output is for one client. This same information will be displayed for all
connected clients unless one of the filtering parameters is used in conjunction with the
show desktop-auditing dhcp command.
The following is sample output from the show desktop-auditing dhcp brief command. Because of the
brief keyword, the results are displayed in table format.
#show desktop-auditing dhcp brief
Columns: E = Enabled, U = Up-to-date, 3 = 3rd party (not MS), S = Snoozed
C = Check for Updates, D = Download Updates, I = Install Updates
! = Error (not installed, other)
Indicators: + = True, - = False, ? = Unknown State
! = Attention
Server
Response R = Client Requires Remediation, N = Client Network Restricted
Codes: . = No Server Response
Client FireWall
---------------------------------------------------------------------------------------------------------------------------------------
00:E0:29:0E:D5:E3
00:E0:29:0E:D5:E4
60000CRG0-35E
Up-To-Date (2009.08.25 10:33:42)
AntiVir
E3S! EU3S!
+-- +++-
--- +-+-
Copyright © 2012 ADTRAN, Inc.
AntiSpy AutoUpd
EU3S! ECDI!
+++- ++--
----! ++++
Enable Mode Command Set
SecUpd Server
Severity Response
Important
Low RN
471