ADTRAN AOS Version R10.1.0 Command Reference Manual page 336

Command Reference Guide
debug mgcp stack
Use the debug mgcp stack command to display information about the Media Gateway Control Protocol
(MGCP) stack and MGCP messages. Variations of this command include:
debug mgcp stack
debug mgcp stack messages
debug mgcp stack messages summary
debug mgcp stack verbose
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
messages
messages summary
verbose
Default Values
No default values are necessary for this command.
Command History
Release A2
Usage Examples
The following is sample output from the debug mgcp stack messages summary command:
#debug mgcp stack messages summary
19:20:22 MGCP.STACK MSGSUM TX: -> 47.234.101.60:2727
19:20:22 MGCP.STACK MSGSUM TX: ntfy 88 aaln/1@65.162.109.238 MGCP 1.0
19:20:22 MGCP.STACK MSGSUM RX: <- 47.234.101.60:2727
19:20:22 MGCP.STACK MSGSUM RX: 200 88 OK
19:20:22 MGCP.STACK MSGSUM RX: <- 47.234.101.60:2727
19:20:22 MGCP.STACK MSGSUM RX: RQNT 30425 aaln/1@65.162.109.238 MGCP 1.0
60000CRG0-35E
Optional. Specifies that MGCP stack messages information is displayed.
Optional. Specifies that MGCP message summary information is displayed.
Optional. Specifies that detailed MGCP stack information is displayed.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
336