ADTRAN AOS Version R10.1.0 Command Reference Manual page 357

Command Reference Guide
debug schedule
Use the debug schedule command to activate debug messages associated with a schedule. Variations of
this command include:
debug schedule
debug schedule <name>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<name>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 17.5
Usage Examples
The following example enables debug information for any configured schedules:
>enable
#debug schedule
01:00:15: NETMON.SCHEDULE MIDNIGHT: status changed to inactive
60000CRG0-35E
Optional. Displays only the debug information for a specific schedule.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
357