Pe2 Pin Function Control Register (Pe2Pfs) - Renesas RX100 Series User Manual

RX13T Group
18.2.10

PE2 Pin Function Control Register (PE2PFS)

Address(es): PE2PFS 0008 C1B2h
b7 b6
— ISEL
0 0
Value after reset:
Bit Symbol Bit Name
b4 to b0 PSEL[4:0] Pin Function Select
b5 — Reserved
b6 ISEL Interrupt Input Function Select
b7 — Reserved
Table 18.9 Register Settings for Input/Output Pin Function in 48-/32-pin
Register/Pin
PE2PFS
PSEL[4:0] Settings PE2
00000b (Initial value) Hi-Z
00111b POE10#
Note: The priority is given to NMI pin interrupt operation when the NMIER.NMIEN = 1
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
b5 b4 b3 b2
— PSEL[4:0]
0 0 0 0
Description
These bits select the peripheral function. For individual pin functions,
see Table 18.9.
This bit is read as 0. The write value should be 0.
0: Not used as IRQn input pin
1: Used as IRQn input pin
PE2:IRQ0 (48-/32-pin)
This bit is read as 0. The write value should be 0.
18. Multi-Function Pin Controller (MPC)
b1 b0
0 0
R/W
R/W
R/W
R/W
R/W
Page 319 of 1041