RX13T Group
29.
Data Operation Circuit (DOC)
29.1
Overview
The data operation circuit (DOC) is used to compare, add, and subtract 16-bit data.
Table 29.1 lists the data operation circuit specifications and Figure 29.1 shows a block diagram of the data operation
circuit.
16-bit data is compared and an interrupt can be generated when a selected condition applies.
Table 29.1
DOC Specifications
Item
Data operation function
Lower power consumption function
Interrupts
DOCR: DOC control register
DODIR: DOC data input register
DODSR: DOC data setting register
Figure 29.1
DOC Block Diagram
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
Description
16-bit data comparison, addition, and subtraction
Module stop state can be set.
An interrupt occurs at the following timings:
The compared values either match or mismatch
The result of data addition is greater than FFFFh
The result of data subtraction is less than 0000h
DODIR
Operation
circuit
DODSR
Interrupt
control circuit
OMS[1:0]
DOPCIE
DOCR
29. Data Operation Circuit (DOC)
Interrupt signal
from data operation circuit
Page 900 of 1041