RX13T Group
26.6.11
Notes on Noise Prevention
To prevent the analog input pins (AN000 to AN007) from being destroyed by abnormal voltage such as excessive surge,
a capacitor should be inserted between AVCC0 and AVSS0, and a protection circuit should be connected to protect the
above analog input pins as shown Figure 26.35 .
*1
Note 1. The values shown here are reference values.
10µF
Note 2. Rin: Signal source impedance
Figure 26.35
Sample Protection Circuit for Analog Inputs
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
0.1µF
*2
Rin
0.01µF
26. 12-Bit A/D Converter (S12ADF)
AVCC0
AN000 to AN007
AVSS0
Page 882 of 1041