Timer Dead Time Enable Register (Tdera) - Renesas RX100 Series User Manual

RX13T Group
19.2.29

Timer Dead Time Enable Register (TDERA)

Address(es): MTU.TDERA 0009 5234h
b7 b6
— —
Value after reset: 0 0
Bit Symbol
b0 TDER
b7 to b1 —
Note 1. TDDRA must be set to 1 or a larger value.
TDERA controls dead time generation in complementary PWM mode. The MTU has one TDER for MTU3. TDERA
should be modified only while TCNT stops.
TDER Bit (Dead Time Enable)
This bit specifies whether to generate dead time.
[Clearing condition]
 When 0 is written to TDER after reading TDER = 1
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
b5 b4 b3 b2
— — — —
0 0 0 0
Bit Name
Dead Time Enable
Reserved
19. Multi-Function Timer Pulse Unit 3 (MTU3c)
b1 b0
— TDER
0 1
Description
0: No dead time is generated
1
1: Dead time is generated*
These bits are read as 0. The write value should be 0.
R/W
R/(W)
R/W
Page 372 of 1041