A/D Channel Select Register C0 (Adansc0) - Renesas RX100 Series User Manual

RX13T Group
26.2.6

A/D Channel Select Register C0 (ADANSC0)

(1) S12AD.ADANSC0
Address(es): 0008 90D4h
b15 b14
— —
0 0
Value after reset:
Bit Symbol
b0 ANSC000
b1 ANSC001
b2 ANSC002
b3 ANSC003
b4 ANSC004
b5 ANSC005
b6 ANSC006
b7 ANSC007
b15 to b8 —
S12AD.ADANSC0 selects analog input channels for A/D conversion from among AN000 to AN007 in group C when
group scan mode is selected. The S12AD.ADANSC0 register is not used in any scan mode other than group scan mode.
ANSC0n Bit (n = 00 to 07) (A/D Conversion Channel Select)
The ANSC0n bit select analog input channels for A/D conversion from among AN000 to AN007 in group C when group
scan mode is selected. The S12AD.ADANSC0 register is used for group scan mode only; not used for any other modes.
The ANSC000 bit corresponds to AN000 and the ANSC007 bit corresponds to AN007.
The ANSC0n bit should be set while the S12AD.ADCSR.ADST bit is 0.
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
b13 b12 b11 b10
— — — —
0 0 0 0
Bit Name
A/D Conversion Channel Select
Reserved
b9 b8 b7 b6
ANSC0 ANSC0 ANSC0
— —
07 06
0 0 0 0
Description
0: AN000 to AN007 are not subjected to conversion.
1: AN000 to AN007 are subjected to conversion.
These bits are read as 0. The write value should be 0.
26. 12-Bit A/D Converter (S12ADF)
b5 b4 b3 b2
ANSC0 ANSC0 ANSC0 ANSC0
05 04 03 02
0 0 0 0
Page 821 of 1041
b1 b0
ANSC0
01 00
0 0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W