Renesas RX100 Series User Manual page 526

RX13T Group
(29) Operation When Error Occurs in Reset-Synchronized PWM Mode and Operation is Restarted
in Reset-Synchronized PWM Mode
Figure 19.171 shows a case in which an error occurs in reset-synchronized PWM mode and operation is restarted in
reset-synchronized PWM mode after re-setting.
MTU module output
MTIOC3A
MTIOC3B
MTIOC3D
PORT output
Pxx
Pxx
Pxx
Figure 19.171 Error Occurrence in Reset-Synchronized PWM Mode, Recovery in Reset-Synchronized PWM
Mode
(1) to (10) are the same as in Figure 19.168 .
(11) Set MTU output using the MPC and port mode registers (PMR) corresponding to the I/O ports.
(12) Restart operation by setting the TSTRA register.
(13) The reset-synchronized PWM waveform is output on compare match occurrence.
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
(1) (2) (3) (4) (5)
TSTR
Reset TOCR TMDR TOER MPC
(RPWM) (1) (MTU)
Hi-Z
Hi-Z
Hi-Z
19. Multi-Function Timer Pulse Unit 3 (MTU3c)
(6)
(7) (8) (9) (10) (11)
Match Error Port TSTR MPC
(1) occurs output (0)
(MTU)
(12) (13)
TSTR Match
(1)
Page 526 of 1041