Data Area Information Inquiry; Block Information Inquiry - Renesas RX100 Series User Manual

32-bit mcu
Hide thumbs Also See for RX100 Series:
Table of Contents

Advertisement

RX13T Group
31.10.5.4

Data Area Information Inquiry

When the MCU receives this command, it sends the number of data areas and addresses.
Command
2Bh
Response
3Bh
SUM
Size (1 byte): Total bytes of data of Number of areas, Area start address, and Area end address (the value is always 09h)
Number of areas (1 byte): Number of areas in the data area (the value is always 01h)
Area start address (4 bytes): Start address of the data area (the value is always 0010 0000h)
Area end address (4 bytes): End address of the data area (the value is always 0010 0FFFh)
SUM (1 byte): Value that is calculated so the sum of the response data is 00h (the value is always 8Dh)
31.10.5.5

Block Information Inquiry

When the MCU receives this command, it sends the start address, the size of one block, and the number of blocks in the
user area and data area.
Command
26h
Response
36h
SUM
Size (2 bytes): Total bytes of data from DDh to Number of blocks of the data area (the value is always 00 19h)
Start address of the user area (4 bytes): Start address of the user area
Block size of one block for the user area (4 bytes): Memory size of one block (the value is always 00 00 08 00h)
Number of blocks of the user area (4 bytes): Number of blocks in the user area
Start address of the data area (4 bytes): Start address of the data area (the value is always 00 10 00 00h)
Block size of one block for the data area (4 bytes): Memory size of one block (the value is always 00 00 04 00h)
Number of blocks of the data area (4 bytes): Number of blocks in the data area (the value is always 00 00 00 04h)
SUM (1 byte): Value that is calculated so the sum of response data is 00h
R01UH0822EJ0100 Rev.1.00
Jul 31, 2019
Number of
Size
areas
Area start address
Area end address
Size
Start address of the user area
Block size of one block for the user area
Number of blocks of the user area
Start address of the data area
Block size of one block for the data area
Number of blocks of the data area
DDh
31. Flash Memory (FLASH)
Page 960 of 1041

Advertisement

Table of Contents
loading

Table of Contents